INDEPENDENT TRANSFORMER BUYER / LOUISIANA-WIDEsaleselectricalbuyers@gmail.com   (614) 715-3047
Power transformer with cooling radiators at an electrical substation
LOUISIANA TRANSFORMER BUYERS

Sell a 15 kV class Transformer in Louisiana

We buy used, surplus and decommissioned transformers across Louisiana. Send the nameplate and tell us about your equipment for a cash offer.

USED + SURPLUS + DECOMMISSIONEDWE BUY. WE NEVER SELL.
Photo: Yoshieslunchbox / CC BY-SA 4.0; resized/cropped for display
01Payments Upfront
02No Testing
03We Cover All Freight
04All Voltage Classes Bought

Selling a transformer associated with 15 kV class

For a sale involving 15 kV class, identify both sides of the transformer rather than treating one voltage as the whole specification. The nameplate may show primary and secondary ratings, phase, frequency, taps, and connection information. These details help distinguish the actual unit from other equipment with a similar voltage designation.

Never open an enclosure, touch a conductor, or change a tap position just to collect information. Photograph the plate only where it can be reached safely, and rely on existing records if it cannot. Isolation, verification of de-energization, and removal belong to qualified personnel following the site's procedures.

For equipment described as 15 kV class, confirm the class designation and exact rated primary and secondary winding voltages from the nameplate or drawings. Share the kVA, phase, insulation level, taps and condition; a voltage class is not itself the exact operating voltage.

Keep electrical details in context

Voltage can be written in volts or kilovolts, and the nameplate may show several tap or winding values. Preserve the original wording and identify which rating belongs to which side when the plate states it. A photograph is helpful because an abbreviated description can omit information that distinguishes the unit.

The buyer may also need the kVA, number of phases, and frequency to understand the transformer. Where a nameplate cannot be read, use existing drawings or records and note any uncertainty. Do not interpret a voltage marking as proof that the equipment is safe to touch or ready for removal.

Build an equipment record

A good equipment record connects the nameplate to the physical unit. Capture the manufacturer, model, serial number, kVA, primary and secondary voltages, phase, and frequency if they are visible. An overall photo can show the enclosure and surroundings; close views can show the nameplate and any obvious damage. If there are multiple units, label the images so they cannot be confused.

Mention the approximate age, dimensions, weight, cooling method, and any service history only when that information is actually known. Existing drawings or records can supplement a photo. If a field is unreadable or unknown, say so; a buyer can discuss the available information without the seller inventing details or accessing an unsafe area.

  • Identify the owner or authorized seller for each transformer.
  • Record the pickup site and whether each unit is installed or staged.
  • Keep existing documentation matched with the correct photographs.

Separate physical observations from assumptions

An exterior photograph can show the enclosure, bushings, corrosion, or an apparent leak, but it cannot by itself establish internal condition. Describe visible observations and known history separately. If accessories have already been removed or a tank has sustained damage, identify that fact and indicate whether the parts are included in the proposed transaction.

The seller does not need to conduct transformer testing. Send existing documentation if it is available and relevant, and identify its date rather than suggesting a historical result describes today's condition. If the buyer needs clarification, discuss what information exists without disturbing equipment or creating an unnecessary electrical or environmental hazard.

Account for shutdown and changeout sequencing

Power plant and industrial shutdowns, utility substation changeouts, and campus electrical projects may involve contractors, restricted areas, and equipment that is released in stages. A unit can be surplus in a planning document while still serving an active circuit. Identify who owns it and who has authority to determine when it is ready to leave.

List firm dates separately from estimates and explain whether a crane, rigging contractor, or other site resources are expected to be involved. The buyer's interest in purchasing a transformer does not replace the project's own electrical, environmental, or access controls. Agree on each party's responsibilities before scheduling the handoff.

Compare the proposed terms with the actual inventory

Before accepting an offer, check that the proposed equipment list corresponds to the physical transformers and their locations. Review the condition description and any identified exclusions, including components that will remain at the site. Equipment characteristics and practical access affect an evaluation; there is no reliable universal price based on rating or location alone.

Offers and any upfront payments are subject to written terms agreed by both parties. The written agreement should specify the price, timing of payment, transfer of ownership, and the responsibilities attached to the sale. Clarify any conditions before committing resources or arranging a release from the facility.

Make pickup practical for both parties

The buyer covers freight, and the parties should coordinate a pickup plan around the actual equipment and site. Explain how the transformer will be reached, whether a loading area is available, and what is known about its weight and dimensions. Include any restrictions on vehicle size, site entry, or the hours when equipment may be moved.

Separate transportation from preparation at the site. Electrical disconnection, rigging, lifting, staging, and loading may involve different people and equipment. The written agreement should identify who arranges those tasks and when the transformer is to be released. Never assume that a truck can collect a unit still surrounded by active equipment.

Protect people, equipment, and the site

The sales process does not authorize electrical work. Qualified personnel must isolate, lock out and tag out, verify the absence of voltage, and disconnect equipment using the facility's approved procedures. Consider alternate feeds, stored energy, grounding requirements, and nearby live parts. Never enter a restricted electrical space or expose terminals just to gather information for an inquiry.

If the transformer contains liquid or its contents are unknown, communicate what is actually documented and identify any visible leak or damage. The seller does not need to test the unit before contacting the buyer. Any necessary environmental assessment, fluid handling, and safe preparation for movement must be arranged with qualified parties under applicable requirements.

Prepare for a well-defined sale

A practical discussion begins with the nameplate, photographs, a description of condition, and the location of each unit. Add the name of the authorized seller and a realistic indication of when the equipment may be released. If a detail is unavailable, say so; the buyer can determine what additional information is useful without requiring a seller-performed test.

Before the equipment changes hands, make sure the written agreement identifies the items, commercial terms, and division of site-handling work. The buyer covers freight, while the parties coordinate the specific loading and access arrangements. Qualified site personnel remain responsible for isolation and a safe release.

READY WHEN YOU ARE

Your transformer has value. Let's talk.

Start with the nameplate. Tell us what you have and where it is, and we’ll discuss a cash offer and the next steps.

(614) 715-3047

saleselectricalbuyers@gmail.com

Text Nameplate Photos

No obligation. We buy transformers; we do not sell them.

Request a Quote

Fields marked * are required.

Photos: 10 MB combined maximum. Your submission is processed by FormSubmit and emailed to us; FormSubmit says submission data is retained for 30 days. Please do not include sensitive personal information. You can also text or email your photos directly.

Request a Quote