INDEPENDENT TRANSFORMER BUYER / LOUISIANA-WIDEsaleselectricalbuyers@gmail.com   (614) 715-3047
Substation transformers connected to a high-voltage grid
LOUISIANA TRANSFORMER BUYERS

Sell Used Federal Pacific Transformers in Louisiana

We buy used, surplus and decommissioned transformers across Louisiana. Send the nameplate and tell us about your equipment for a cash offer.

USED + SURPLUS + DECOMMISSIONEDWE BUY. WE NEVER SELL.
Photo: Mosbatho / CC BY 4.0; resized/cropped for display
01Payments Upfront
02No Testing
03We Cover All Freight
04All Voltage Classes Bought

What matters beyond the Federal Pacific name

A transformer labeled Federal Pacific may differ substantially from another unit carrying the same name. A buyer needs to understand its capacity, voltage, configuration, physical condition, and location before considering a purchase. The brand reference is for identification only and implies no manufacturer affiliation or endorsement.

If the unit has been altered, repaired, stored outdoors, or separated from accessories, describe that history as far as it is actually known. Include the visible model and serial information when available. A seller does not need to run a test to begin the discussion; existing records can be shared without representing them as current results.

For a transformer bearing the Federal Pacific name, photograph the complete nameplate and provide the model, kVA, winding voltages, phase, cooling medium, condition and available test records. Confirm buyer interest and any removal terms for the specific equipment.

Identify the particular unit

Older equipment can have more than one label or a model designation that differs from a current corporate name. Share the markings as they appear and distinguish a manufacturer's plate from a contractor's or facility's identification tag. If paperwork identifies a replacement component, say which part it describes instead of assuming the entire transformer was made by that company.

A brand cannot establish service history, fluid condition, or operational performance. Existing records, visible exterior condition, and the seller's actual knowledge can be presented as separate facts. The buyer can review those details without the seller performing tests or implying any manufacturer endorsement.

Build an equipment record

A good equipment record connects the nameplate to the physical unit. Capture the manufacturer, model, serial number, kVA, primary and secondary voltages, phase, and frequency if they are visible. An overall photo can show the enclosure and surroundings; close views can show the nameplate and any obvious damage. If there are multiple units, label the images so they cannot be confused.

Mention the approximate age, dimensions, weight, cooling method, and any service history only when that information is actually known. Existing drawings or records can supplement a photo. If a field is unreadable or unknown, say so; a buyer can discuss the available information without the seller inventing details or accessing an unsafe area.

  • Identify the owner or authorized seller for each transformer.
  • Record the pickup site and whether each unit is installed or staged.
  • Keep existing documentation matched with the correct photographs.

Be candid about what is and is not known

A transformer may be a stored spare, an operating unit awaiting retirement, or equipment whose history is incomplete. Explain its actual status and any known repairs, missing accessories, damage, leaks, or storage exposure. A useful disclosure can be as simple as noting that the unit was received with no operating history. Accuracy helps the buyer evaluate the equipment on its own merits.

No seller testing is required to start the discussion. Existing records may be relevant, but they should not be described as current test results unless they actually are. Avoid opening electrical compartments, energizing equipment, or handling insulating fluid to gather information for a possible sale.

Coordinate with the wider project

Surplus transformers can arise from chemical plant shutdowns, refinery turnarounds, or industrial plant closures, but every project has its own release sequence. A turnaround may end with the facility returning to service, while a permanent closure can involve demolition and several equipment owners. Identify which units are actually available and which must remain in use until the responsible team releases them.

A preliminary equipment list can be prepared before work is complete. Update the buyer when a status or access condition changes, and do not represent a tentative removal date as a confirmed pickup date. Keep electrical isolation and any site-specific permits within the facility's established procedures.

Understand the offer and payment terms

A potential offer depends on the equipment described and the circumstances of the transaction. Ratings, construction, condition, completeness, access, and the number of units can all matter. A location or brand by itself does not establish a fixed value. The seller should identify any known limitations so the parties are discussing the same equipment and the same scope.

Offers and any upfront payments are subject to written terms agreed by both parties. Review the equipment list, price, payment timing, transfer of ownership, and any conditions in that agreement. Do not treat an initial discussion as a completed sale or assume a payment has been promised before its terms are accepted in writing.

Make pickup practical for both parties

The buyer covers freight, and the parties should coordinate a pickup plan around the actual equipment and site. Explain how the transformer will be reached, whether a loading area is available, and what is known about its weight and dimensions. Include any restrictions on vehicle size, site entry, or the hours when equipment may be moved.

Separate transportation from preparation at the site. Electrical disconnection, rigging, lifting, staging, and loading may involve different people and equipment. The written agreement should identify who arranges those tasks and when the transformer is to be released. Never assume that a truck can collect a unit still surrounded by active equipment.

Keep electrical and environmental safety first

A transformer can present serious electrical hazards even when it appears idle. Isolation, lockout and tagout, verification of de-energization, grounding where required, and disconnection must be performed by qualified personnel under the site's procedures. Backfeed, stored energy, and nearby energized equipment must be considered. Do not touch conductors, open secured compartments, or attempt removal to obtain a photograph.

Liquid-filled equipment can also present handling and environmental issues. Communicate known fluid information, leaks, and existing records to the buyer. Do not drain or sample a unit solely for a sales inquiry; qualified parties should manage any necessary environmental assessment and handling under applicable rules. The seller need not perform a test to begin the conversation.

A clear path from information to handoff

Begin with the equipment list and safely available photographs, then explain ownership, location, condition, and anticipated availability. The buyer can review the information and discuss whether a purchase is appropriate. Resolve discrepancies in the inventory and identify any missing information rather than allowing an uncertain description to become an assumed fact.

If the parties decide to proceed, document the offer, payment terms, freight plan, and site responsibilities. Coordinate release with qualified site personnel and keep a record of which units and accessories are transferred. This sequence supports a practical sale while leaving operational and safety decisions with the people responsible for the site.

READY WHEN YOU ARE

Your transformer has value. Let's talk.

Start with the nameplate. Tell us what you have and where it is, and we’ll discuss a cash offer and the next steps.

(614) 715-3047

saleselectricalbuyers@gmail.com

Text Nameplate Photos

No obligation. We buy transformers; we do not sell them.

Request a Quote

Fields marked * are required.

Photos: 10 MB combined maximum. Your submission is processed by FormSubmit and emailed to us; FormSubmit says submission data is retained for 30 days. Please do not include sensitive personal information. You can also text or email your photos directly.

Request a Quote